Rear Brake Fluid Hose

🔧 CFMoto Rear Brake Fluid Hose

📦 Part Number: 9AWA-080140

⚙️ Rear Brake Hose · OEM Specification

📍 Installation Position: Rear Brake System · Connects Master Cylinder to Rear Brake Caliper

✅ High Pressure Resistant Rubber · Multi-Layer Braided Reinforcement · Suitable for Multiple CFMoto ATV Models

This product is a CFMoto OEM specification rear brake fluid hose, part number 9AWA-080140. This brake hose connects the brake master cylinder to the rear brake caliper, transmitting brake fluid pressure to activate the rear brakes. Manufactured from high-quality oil-resistant rubber with an inner layer of brake fluid-resistant synthetic rubber (EPDM), a middle layer of high-strength braided reinforcement (polyester or steel wire), and an outer layer of weather-resistant rubber, it is designed to withstand high brake fluid pressure and harsh environments.

Over time, brake hoses may experience aging, cracking, bulging, or leakage, leading to reduced braking power, a spongy brake pedal, or even complete brake failure, posing a serious safety risk. Regular inspection and timely replacement of aged or damaged brake hoses are critical to ensuring braking system reliability.

• ✅ OEM Original Specification: Manufactured strictly to CFMoto original technical standards. Fitting dimensions and length match original parts completely.
• 🛡️ Three-Layer Construction: Inner brake fluid-resistant synthetic rubber, middle high-strength braided reinforcement, outer weather-resistant rubber for long-term reliability.
• 🔧 Precision Crimped Fittings: Metal fittings are precision-crimped to the hose for a secure, leak-free connection.
• 💪 High Pressure Resistance: Capable of withstanding normal operating pressures and peak pressures of the brake system.
• 🔄 Direct Replacement: Directly replaces aged, cracked, or leaking original rear brake hoses.

✅ Typical Signs That Brake Hose Replacement Is Needed:
• Cracks, bulging, or hardening on the brake hose surface.
• Brake fluid leakage visible on the brake system.
• Spongy brake pedal, increased pedal travel, or reduced braking power.
• Leakage at the connection between rubber hose and metal fitting.
• Regular maintenance indicates the hose has exceeded the recommended service life (typically 4-6 years).
If you experience any of these symptoms, please inspect and replace the brake hose promptly.

✅ Installation Tips:
1. Ensure the vehicle is safely secured before replacing the brake hose.
2. When removing the old hose, prepare a container to catch leaking brake fluid to avoid environmental contamination.
3. When installing the new hose, ensure copper washers or seals are properly positioned to prevent leakage.
4. Tighten fitting bolts to OEM torque specifications to avoid damaging threads or causing leaks.
5. After installation, brake system bleeding is required to remove air from the lines.
6. After bleeding, depress the brake pedal repeatedly to check brake performance and inspect all fittings for leaks.
⚠️ The brake system is critical to vehicle safety. Professional installation by a qualified technician is strongly recommended.

⚠️ Important Notice: This product is a CFMoto rear brake fluid hose, part number 9AWA-080140. Suitable for the CFMoto ATV models listed above. Minor variations may exist between production batches. If your specific model is not listed, please contact us with your VIN for compatibility verification. Images are for reference only; actual product may vary.