Rear Output Coupler

Brand: Mortch Motor
Product Code: MICF0JYA-060103

Product Viewed: 1

Availability: 1

Weight: 0.43kg

0 reviews / Write a review

US$24.00

Shipping To：

More Quotes

Qty

Buy Now

Tell a Friend Ask a Question

🔧 CFMoto Rear Output Coupler

📦 Part Number: 0JYA-060103

⚙️ Rear Output Coupler · Output Flange · OEM Spec

📍 Installation Location: Transmission/Transfer case / Rear output shaft end

✅ Single unit · High-strength metal · Direct fit · Compatible with multiple CFMoto SSV models

📋 Product Overview

This is a CFMoto OEM-spec Rear Output Coupler, part number 0JYA-060103, sold as a single unit. This coupler is a flange-type connecting component installed on the rear output shaft of the transmission or transfer case. It connects to the rear drive shaft to transfer power from the transmission/transfer case to the rear axle — a critical connecting component in 4WD or rear-wheel-drive drivetrains.

Over time, the original coupler may suffer from spline wear, flange deformation, thread damage, or fatigue cracks under high loads, high torque, and rough terrain — leading to loose drive shaft connections, vibration, noise, or power interruption. Replacing with an OEM-spec rear output coupler is essential to restore driveline connection reliability and safety.

✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Made from high-strength metal, with spline specifications, flange dimensions, and mounting interfaces identical to the genuine part, ensuring a perfect replacement and reliable power transfer performance.

📐 Specifications

🔖 Part Number: 0JYA-060103

🏷️ Product Name: Rear Output Coupler / Output Flange

📦 Packaging: Single unit

📍 Installation: Transmission/Transfer case rear output shaft end

🧪 Material: High-strength metal

⚙️ Function: Connect rear drive shaft · Transfer power

🚗 Vehicle Compatibility

This Rear Output Coupler (part number 0JYA-060103, single unit) fits the following CFMoto SSV models:

🏎️ ZForce 950 / 1000 Series

2024-2026 CF1000STR-3L · ZForce 950 Sport-4
2023-2026 CF1000UTR-6(T1b) · ZForce 950 Sport
2023-2025 CF1000SZ-3 · ZForce 950 Trail
2023-2025 CF1000SZ-3A · ZForce 950 Sport
2024-2025 CF1000SZ-3L · ZForce 950 Sport 4

🏎️ ZForce 800 Series

2025-2026 CF800SU-3 · ZForce 800 Sport
2023-2025 CF800SZ-2 · ZForce 800 Trail

📌 Fitment Note: This rear output coupler fits the transmission/transfer case rear output shaft end of the listed CFMoto SSV models. Sold as a single unit. If your specific model is not listed, please contact us with your VIN to confirm compatibility.

⚙️ Product Features

✅ OEM Original Spec: Manufactured to CFMoto original technical standards; spline specs, flange dimensions, and mounting interfaces match the genuine part exactly.
🛡️ High-Strength Metal: Made from premium metal with excellent torsional strength and fatigue resistance to handle high drivetrain torque loads.
🔧 Precision Machined: Splines and flange surfaces are precision-machined for accurate fit with output shafts and drive shafts.
💪 Direct Fitment: Direct replacement for the original part — no modifications required.
🔄 Direct Replacement: Replaces couplers with worn splines, deformed flanges, or damage.

✅ Typical signs you need to replace the Rear Output Coupler:
• Unusual noise at the transmission-to-drive shaft connection (metal knocking or grinding).
• Hesitation or jerking in the drivetrain during acceleration or deceleration.
• Severe spline wear with excessive clearance between the coupler and output shaft (visual inspection).
• Flange deformation or damaged bolt holes causing loose drive shaft connections.
• Cracks or fatigue damage on the coupler.
If any of these occur, inspect and replace the rear output coupler promptly to prevent further drivetrain damage.

✅ Installation Tips:
1. Confirm the coupler is the correct 0JYA-060103 matching the original.
2. Raise the vehicle with proper support.
3. Remove the rear drive shaft connecting bolts and detach the drive shaft.
4. Use a suitable tool to remove the coupler retaining nut and take out the old coupler.
5. Clean the output shaft splines and mounting surface.
6. Install the new coupler onto the output shaft in the correct orientation, ensuring proper spline engagement.
7. Install the retaining nut and torque to OEM specifications.
8. Reinstall the rear drive shaft and torque the connecting bolts to OEM specifications.
9. Perform a road test to confirm no noise or vibration in the drivetrain.
Installation requires professional lifting equipment and mechanical skill; professional installation recommended.

⚠️ Important Note: This product is a CFMoto Rear Output Coupler, part number 0JYA-060103, sold as a single unit. Fits the listed CFMoto SSV models. Slight variations may occur between production batches. If your specific model is not listed, please contact us with your VIN to confirm compatibility. Images are for reference only; actual product may vary. Ensure splines are clean and apply a light coat of grease during installation. Torque all bolts to OEM specifications.

🔧 Compatibility Notice

Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.

📄 Product Disclaimer

Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.

💰 Import Duties & Taxes

All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.

📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.